Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Mito
    4. : Disassembly of the front bumper of the Alfa Romeo Mito

Alfa Romeo Mito - Video tutorial

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Front bumper
Operation: Disassembly of the front bumper of the Alfa Romeo Mito

In today's video tutorial we will see how to remove and replace the front bumper of the Alfa Romeo Mito, following the instructions below. First of all we open the bonnet and start by unscrewing all the screws that we find on the upper and lower part of the front bumper; after which we unscrew the screws that we find on both sides of the wheel arches, as shown in the video. At this point we gently unclip the bumper on the sides; we just have to remove it definitively and replace it, if necessary, with the new one, applying the reverse procedure of disassembly!


Posted on 13 July 2022 by ScegliAuto



Removing the rear bumper Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In this video we will see how to remove the front bumper of the Alfa Romeo Mito. First we go to identify the screws: inside the wheel arch we find th
How do you remove the front bumper of the Alfa Romeo MiTo?
Alfa Romeo Mito (2008-2018 / MK 1) In order to remove the front bumper of the Alfa Romeo MiTo, you need to loosen all the trox screws that fix the piece to the front of the car: we wil
Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to locate the precise locations of the fuses on your Alfa Romeo Mi

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos