Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of the Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Rear bumper

Video tutorial

Removing the rear bumper of the Alfa Romeo Mito, if necessary, is a very simple and quick operation that can be done independently. First, park the vehicle on a flat surface and then open the boot.

Next, start by removing the bumper; to do this, unscrew all the screws that secure the rear bumper. The screws are divided into three parts: upper, lower, and side.

Once the screws are removed, you can completely disconnect the connector. Refit the bumper by following the same procedure described earlier.


Updated on 7 November 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of an Alfa Romeo Mito
How to Remove the Rear Bumper of an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) How to remove the rear bumper of an Alfa Romeo Mito? Follow these steps carefully. Open the boot; using a socket or battery-powered screwdriver, undo…
How to Remove the Rear Bumper of the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Today's steps will show you how to remove and replace the rear bumper of the Alfa Romeo Mito. First, move to the outside of the vehicle and begin uns…
How to Remove the Rear Bumper on the Alfa Romeo MiTo?
How to Remove the Rear Bumper on the Alfa Romeo MiTo?
Alfa Romeo Mito (2008-2018 / MK 1) In this tutorial, you will learn how to remove the rear bumper on the Alfa Romeo MiTo, a very simple and quick operation. Start by opening the boot l…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos