Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to repair the door handle of a 2008 Buick Lucerne.

Model: Buick Buick Various
Part: Handle

As shown in the video, if you are interested in a DIY repair of the handle on a 2008 Buick Lucerne, you will need to remove the entire interior door panel connected to that handle. First, you will need to unscrew the only screw connected to the handle. Then, using a lever or pry bar with some tape or adhesive tape to avoid damaging the paint, you will need to release all the latches or pins that hold the door in place as shown in the video. Once the outer panel is removed, you will have access to the inner panel where you will need to remove two bolts that hold the handle in place. Once removed, you can detach the handle and make the necessary repairs.

Posted on 31 May 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Buick Lucerne key.
How to replace the battery of the Buick Lucerne key.
Buick Buick Various Today we will explain how to replace the battery of the remote control for the Buick Lucerne car model produced from 2006 to 2011. The battery model …
Where is the fuse box of the Buick Rainier located?
Where is the fuse box of the Buick Rainier located?
Buick Buick Various In the following guide aimed at all of you who own a Buick Rainier, we will explain in a simple and effective way how you can locate the engine fuse …
How to replace the battery of the Buick Envista key.
How to replace the battery of the Buick Envista key.
Buick Buick Various To disassemble the key of your Buick Envista and replace the button battery inside it correctly and quickly, simply follow these simple steps. First,…

How to Replace the Rear Headlight Bulbs on a Peugeot 308

Are the rear lights on your Peugeot 308 SW not working? This video shows how to replace the damaged bulbs. Open the boot lid, and using a screwdriver, unscrew (with a socket wrench or screwdriver with a bit) the securing nuts located at the side of the rear headlight. Once the headlight is free from any constraints, detach it from the bodywork (disconnect the relevant power connectors). Replace the damaged bulbs with identical ones in size and voltage. Finally, refit the headlight and reverse the assembly of the other parts.

Watch the video!


by ScegliAuto

More videos