Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight Bulbs on a Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Tail light bulb

Are the rear lights on your Peugeot 308 SW not working? This video shows how to replace the damaged bulbs. Open the boot lid, and using a screwdriver, unscrew (with a socket wrench or screwdriver with a bit) the securing nuts located at the side of the rear headlight. Once the headlight is free from any constraints, detach it from the bodywork (disconnect the relevant power connectors). Replace the damaged bulbs with identical ones in size and voltage. Finally, refit the headlight and reverse the assembly of the other parts.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Bulbs in the Rear Light of a Peugeot 308
How to Replace the Bulbs in the Rear Light of a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) How to replace the bulbs in the rear light of a Peugeot 308? This is a very simple operation, here's how to proceed: Open the boot, then remove the f…
Replacing Front Headlamp Bulb on Peugeot 308
Replacing Front Headlamp Bulb on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Have damaged bulbs on your Peugeot 308? Here's how to remove them from inside the headlamp. Open the front bonnet by pulling the lever located at the…
How to Replace the Headlight Bulbs on a Peugeot 308
How to Replace the Headlight Bulbs on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Open the bonnet by pulling the lever located at the bottom right of the dashboard, and secure it with the prop. Locate the rubber inspection cap at t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos