Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bulb on a Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light bulb

See other generations:
Video tutorial

To replace the bulb in the rear headlight, you will need to remove the headlight itself, but this is a very simple operation; once the rear hatch is open, remove the carpet lining directly above the headlight and locate the plastic rings that secure it to the body; manually unscrew these rings and pull the headlight away from its housing, disconnect the power connector and lever the tabs of the bulb holder to remove it; at this point, you can proceed with replacing the bulbs and reverse the steps for reassembly.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

Replacing the Gear Knob on the Peugeot 308 SW MK1
Replacing the Gear Knob on the Peugeot 308 SW MK1
Peugeot 308 (2007-2014 / T7, MK 1) In this short and simple guide, you will learn how to disassemble and replace the gear knob on the Peugeot 308, including the station wagon version, …
How to Replace the Diesel Filter on a Peugeot 308?
How to Replace the Diesel Filter on a Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) To replace the diesel filter on a Peugeot 308, open the bonnet to access the components in the engine bay. The diesel filter is located immediately t…
How to Change the Engine Oil and Filter on the Peugeot 308
How to Change the Engine Oil and Filter on the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) On the Peugeot 308, the job is set up like a classic oil service: secure the vehicle and first drain the used oil, working from underneath with a pro…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos