Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to replace the front bumper on the BMW 3 Series

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E92, E91, E90 - Years 2005-2013
Part: Front bumper
Operation: How to replace the front bumper on the BMW 3 Series

This simple operation will be illustrated in this short video guide. As a first step it will be necessary to lift the hood to be able to unscrew and remove the bolts that secure the upper part of the bumper, now you will have to unscrew the bolts and clips that secure the inner part of the fender to the rear inner part of the bumper, obviously this operation it will have to be repeated on both sides, also remove the screws securing the lower part of the bumper to the lower engine cover and now all you have to do is pull the bumper off being careful to disconnect the plugs at the rear.


Posted on 5 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Serie 3 2005-2013 - How do you remove the front bumper of the BMW E90? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos