Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front and Rear Emblems on the Cadillac XT5?

Model: Cadillac Xt5 MK 1 - Years 2017-2024
Part: Body

This tutorial explains how to replace the monochromatic front and rear emblems on the vehicle in question. For the front emblem, remove the bumper. After opening the hood, take off the upper seal and unscrew the retaining pins of the bumper. Next, proceed to remove the front fender trim, unscrew the bumper pins here as well, and once you disconnect the electrical connector, detach the bumper. After that, replace the emblem and reassemble everything. For the rear emblem, located on the liftgate, simply heat it with a heat gun, detach it, clean off the residual adhesive, and attach the new one.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Cadillac XT5?
How to Replace the Front Brake Pads on a Cadillac XT5?
Cadillac Xt5 (2017-2024 / MK 1) To replace the front brake pads on a Cadillac XT5, lift the vehicle so that it is not in contact with the ground. Then, remove the mounting screws of…
Where to Find the Fuse Box of the Cadillac XT5
Where to Find the Fuse Box of the Cadillac XT5
Cadillac Xt5 (2017-2024 / MK 1) If you are looking for the fuse box of your Cadillac XT5 and have not been able to find it, don't worry because below you will find all the useful in…
How to Replace the Headlight and Tail Lights on a Cadillac XT5
How to Replace the Headlight and Tail Lights on a Cadillac XT5
Cadillac Xt5 (2017-2024 / MK 1) Today's procedure will show you the steps to remove and replace the tail light and its bulbs on a Cadillac XT5. First, open the trunk lid and start u…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos