Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Chevrolet Impala - Lock

Chevrolet Impala (2006-2016 / MK 9)
How do you replace the ignition switch of the Chevrolet Impala?
In order to replace the ignition switch of the Chevrolet Impala, you need to use an object to pry off the plastic covers that are located on the bottom and top …read all…
Posted on 12 July 2023 by ScegliAuto
Alternator (1) Car stereo (1) Battery (2) Spark plugs (1) Key (1) -board computer (1) Checks and maintenance (1) Headlight (1) Air filter (1) Cabin air filter (1) Headlight bulb (2) Front bumper (1) Instrument cluster (1) Fuse box (1) Lock (1) Manufacturer's coat of arms (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos