Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Ignition Switch on a Chevrolet Impala?

Model: Chevrolet Impala MK 9 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Door lock

See other generations:
Video tutorial

To replace the ignition switch on a Chevrolet Impala, use a tool to pry off the plastic covers located on the upper and lower parts of the steering column: once these are removed, you can access the switch, which can be taken out by unscrewing the fastening screws and disconnecting the appropriate wires.

After removal, connect the new switch and insert it into its position, securing it with the bolts and covering everything with the respective covers.


Updated on 6 August 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a 2007 Chevrolet Impala
How to Replace the Cabin Air Filter on a 2007 Chevrolet Impala
Chevrolet Impala (2006-2016 / MK 9) To correctly and safely replace the cabin air filter in your 2007 Chevrolet Impala, read the following guide and follow the steps described. First, m…
How to Replace the Air Filter in a Chevrolet Impala
How to Replace the Air Filter in a Chevrolet Impala
Chevrolet Impala (2006-2016 / MK 9) In today’s video, you will see how to replace the air filter in a Chevrolet Impala. First, it is recommended to work only when the engine is cold, so…
How do you reset the tire pressure light on the Chevrolet Impala?
How do you reset the tire pressure light on the Chevrolet Impala?
Chevrolet Impala (2014-2020 / MK 10) In order to reset the tire pressure warning light on the Chevrolet Impala, you need to inflate the tires until they reach the recommended pressure va…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos