Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the third brake light bulbs in a Chevrolet Silverado pickup truck?

Model: Chevrolet Silverado MK 3 - Years 2014-2018
Part:

In this tutorial we can see how to replace the third brake light bulbs in the Chevrolet Silverado pickup truck, a very simple and quick operation. First of all, make sure that the key is not inserted, then position yourself in front of the third brake light, locate the two fixing screws at the ends and unscrew them using a Torx T20 key. Then grab the tail light, pull it towards you and separate it from the bodywork. At this point we can extract the bulb holder by rotating it counterclockwise, replace the faulty bulb and reassemble everything by following the reverse procedure.

Posted on 15 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the third brake light bulb on the Chevrolet Silverado MK3
How to change the third brake light bulb on the Chevrolet Silverado MK3
Chevrolet Silverado (2014-2018 / MK 3) In this video, we will see how to change the third brake light bulb on the Chevrolet Silverado MK3, which is located on the top of the pickup cabin: …
How to Replace the Rear Headlight on a Chevrolet Silverado?
How to Replace the Rear Headlight on a Chevrolet Silverado?
Chevrolet Silverado (2014-2018 / MK 3) Replacing the rear headlight on a Chevrolet Silverado pickup is a very simple and quick operation. Let's see how to proceed in this tutorial. Start b…
How to Replace the Headlight Bulbs in a Chevrolet Silverado Pickup?
How to Replace the Headlight Bulbs in a Chevrolet Silverado Pickup?
Chevrolet Silverado (2014-2018 / MK 3) In this tutorial, you will see how to replace the headlight bulbs in a Chevrolet Silverado pickup, a very simple and quick operation. First, ensure t…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos