Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs in a Chevrolet Silverado Pickup?

Model: Chevrolet Silverado MK 3 - Years: 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

In this tutorial, you will see how to replace the headlight bulbs in a Chevrolet Silverado pickup, a very simple and quick operation. First, ensure that the key is not in the ignition, then open the hood, locate the large cap at the back of the headlight in question, and remove it by turning it slightly counterclockwise.

Extract the old bulb in the same way, disconnect it from the connector, and following the reverse procedure, install the replacement. Avoid touching the new bulb directly with your bare hands, as any residues could cause it to overheat.


Updated on 14 August 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Headlight on a Chevrolet Silverado?
How to Replace the Rear Headlight on a Chevrolet Silverado?
Chevrolet Silverado (2014-2018 / MK 3) Replacing the rear headlight on a Chevrolet Silverado pickup is a very simple and quick operation. Let's see how to proceed in this tutorial. Start b…
How to Replace the Third Brake Light Bulbs on a Chevrolet Silverado Pickup?
How to Replace the Third Brake Light Bulbs on a Chevrolet Silverado Pickup?
Chevrolet Silverado (2014-2018 / MK 3) In this tutorial, you will see how to replace the third brake light bulbs on a Chevrolet Silverado pickup, a very simple and quick operation. First, …
Where is the Parking Light Fuse on a Chevrolet Silverado Pickup?
Where is the Parking Light Fuse on a Chevrolet Silverado Pickup?
Chevrolet Silverado (2007-2014 / MK 2) If the parking lights on your Chevrolet Silverado pickup have suddenly stopped working and the bulbs are intact, you can check the status of the resp…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos