Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Silverado
    4. : How to replace the headlight on a Chevrolet Silverado.

Chevrolet Silverado - Video tutorial

Model: Chevrolet Silverado MK 1 - Years 1998-2007
Part: Headlight
Operation: How to replace the headlight on a Chevrolet Silverado.

This video will show us how to replace the headlight on a Chevrolet Silverado. We will have to start by pulling the lever for opening the hood near the pedals; we will then go to the hood and raise it, pulling the special hook shown at 0:50. Now we will have to remove the hook that is above the headlight; it will be sufficient to lift it to be able to grip it and then, gradually, to extract it. After this operation, the headlight will be released and we will be able to remove it, making sure that the connectors have been extracted. Now we can insert the new piece, reinsert the connectors and secure it in place with the hook we pulled out earlier.


Posted on 30 March 2024 by ScegliAuto



How to replace the headlight bulb on the Chevrolet Silverado?
Chevrolet Silverado (2007-2014 / MK 2) In order to replace the headlight bulb of the Chevrolet Silverado you have to loosen the screws that secure the headlight itself. These screws are lo
How to replace the headlight bulb in the Chevrolet Silverado?
Chevrolet Silverado (2014-2018 / MK 3) In this video we can see how to replace the headlight bulb in the Chevrolet Silverado. As for the passenger side, the air filter box must first be re
How to replace the rear light of the Chevrolet Silverado?
Chevrolet Silverado (2014-2018 / MK 3) Replacing the rear light of the Chevrolet Silverado pick-up is a very simple and fast operation, let's see how to proceed in this tutorial. Let's sta

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos