Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight on a Chevrolet Silverado?

Model: Chevrolet Silverado MK 3 - Years 2014-2018
Part: Headlight

To replace the front headlight on a Chevrolet Silverado, open the hood to access the rivets securing the front panel of the engine compartment. Next, loosen the screws that hold the front bumper in place; these are located inside the two wheel wells. By removing the bumper and the panel, you will gain access to the screws underneath, which will allow you to pull the headlight from its housing while disconnecting the connectors. Once the old headlight is removed, you can install a new replacement part.

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Chevrolet Silverado
How to Replace the Headlight Bulb on a Chevrolet Silverado
Chevrolet Silverado (2007-2014 / MK 2) To replace the headlight bulb on a Chevrolet Silverado, loosen the screws that secure the headlight assembly. These screws are located on the top and…
How to Replace the Headlight Bulb in a Chevrolet Silverado?
How to Replace the Headlight Bulb in a Chevrolet Silverado?
Chevrolet Silverado (2014-2018 / MK 3) In this video, you can see how to replace the headlight bulb in a Chevrolet Silverado. For the passenger side, first remove the air filter box by uns…
How to Replace the Fog Light on a Chevrolet Silverado?
How to Replace the Fog Light on a Chevrolet Silverado?
Chevrolet Silverado (1998-2007 / MK 1) To replace the fog light on a Chevrolet Silverado, access the inside of the front bumper from underneath the vehicle. This will allow you to remove t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos