Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Silverado
    4. : Chevrolet Silverado Headlight Assembly Replacement [USA]

Chevrolet Silverado - Video tutorial

Model: Chevrolet Silverado MK 1 - Years 2019-2024
Part: Headlight
Operation: Chevrolet Silverado Headlight Assembly Replacement [USA]

Open the bonnet and remove the 12 pins that lock the front crankcase of the engine compartment, remove the crankcase and unscrew the 4 10 mm bolts with a ratchet wrench. Now it is necessary to remove the front band placed above the bumper, this band is fixed with bolts on the right and left sides. Remove the band being careful not to break the clips, after which, unscrew the 4 fixing bolts of the engine cooling grille and extract the grille itself. At this point I have access to the optical group and, with a 10 mm ratchet wrench, remove the 4 bolts positioned two at the top and two at the bottom and the headlight is free. Finally, disconnect the power supply connector. Take the new optical unit and carry out all the operations described above in reverse.


Posted on 19 April 2024 by ScegliAuto



How to mount an LED reversing lamp on Chevrolet Silverado [USA]
Chevrolet Silverado (2014-2018 / MK 3) In order to replace the reversing light bulb on the Chevrolet Silverado it is necessary to proceed as follows: open the tailgate, there is a fixing s
How to replace the headlight bulb on the Chevrolet Silverado?
Chevrolet Silverado (2007-2014 / MK 2) In order to replace the headlight bulb of the Chevrolet Silverado you have to loosen the screws that secure the headlight itself. These screws are lo
How to replace the rear light of the Chevrolet Silverado?
Chevrolet Silverado (2014-2018 / MK 3) Replacing the rear light of the Chevrolet Silverado pick-up is a very simple and fast operation, let's see how to proceed in this tutorial. Let's sta

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos