Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Silverado
    4. : Headlight

Chevrolet Silverado - Headlight

Chevrolet Silverado (2019-2024 / MK 1)
Chevrolet Silverado Headlight Assembly Replacement [USA]
Open the bonnet and remove the 12 pins that lock the front crankcase of the engine compartment, remove the crankcase and unscrew the 4 10 mm bolts with a …read all…
Posted on 19 April 2024 by ScegliAuto
Chevrolet Silverado (1998-2007 / MK 1)
How to replace the headlight on a Chevrolet Silverado.
This video will show us how to replace the headlight on a Chevrolet Silverado. We will have to start by pulling the lever for opening the hood near the pedals; …read all…
Posted on 30 March 2024 by ScegliAuto
Chevrolet Silverado (2014-2018 / MK 3)
How to replace the headlight of the Chevroler Silverado?
In order to replace the front headlight of the Chevroler Silverado, the hood must be opened so that the rivets that secure the front panel of the engine …read all…
Posted on 28 March 2024 by ScegliAuto
Chevrolet Silverado (2007-2014 / MK 2)
How to replace the headlight on the Chevrolet Silverado MK2
In this video tutorial we will see how to remove and replace the front light assembly of the second series Chevrolet Silverado. First of all, we open the …read all…
Posted on 26 March 2024 by ScegliAuto
Chevrolet Silverado (2014-2018 / MK 3)
How to remove the front headlights of the Chevrolet Silverado
In this video we will see how to replace the front bulbs in the Chevrolet Silverado. Let's start by opening the front hood and proceed by removing the plastic …read all…
Posted on 22 March 2024 by ScegliAuto
Airbags (2) Loudspeaker (1) Shock absorbers (1) Antenna (3) Air conditioning (1) Car stereo (4) Battery (11) Key (10) Air conditioning controls (1) -board computer (5) Checks and maintenance (6) Rear bench seat (1) Headlight (5) Tail light (2) Fog lights (1) Air filter (4) Cabin air filter (6) Diesel filter (5) Grille (1) Light bulb (2) Headlight bulb (4) Rear light bulb (1) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (1) Handle (4) Engine oil (7) Door panel (4) Front bumper (1) Brake pads (2) Fuel pump (5) Door (2) Instrument cluster (5) Passenger compartment heating radiator (1) Wheel (1) Fuse box (5) Seat (4) Crankshaft RPM sensor (1) Lambda sensor (1) Outside rearview mirror (3) Manufacturer's coat of arms (2) Windscreen wipers (3) Thermostat (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos