Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight of the Chevrolet Silverado MK2

Model: Chevrolet Silverado MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight

See other generations:
Video tutorial

In this video tutorial, you will see how to remove and replace the front headlight assembly of the second generation Chevrolet Silverado. First, open the hood and start by removing the plastic cover above the bumper; to do this, remove all the clips and unscrew the screws with a socket wrench, as shown in the video.

Next, unclip the front grille to remove it; then unscrew the additional screws found on both sides of the wheel wells to remove the front headlight, disconnecting the electrical connector for the bulbs. Now, replace and reassemble everything!


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight on a Chevrolet Silverado?
How to Replace the Front Headlight on a Chevrolet Silverado?
Chevrolet Silverado (2014-2018 / MK 3) To replace the front headlight on a Chevrolet Silverado, open the hood to access the rivets securing the front panel of the engine compartment. Next,…
How to Replace the Headlight Bulb on a Chevrolet Silverado
How to Replace the Headlight Bulb on a Chevrolet Silverado
Chevrolet Silverado (2007-2014 / MK 2) To replace the headlight bulb on a Chevrolet Silverado, loosen the screws that secure the headlight assembly. These screws are located on the top and…
Replace the Rear Headlight on the Chevrolet Silverado MK2
Replace the Rear Headlight on the Chevrolet Silverado MK2
Chevrolet Silverado (2007-2014 / MK 2) In today's tutorial video, you will see how to disassemble and replace the rear headlight on the second generation Chevrolet Silverado by following t…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos