Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Rear Headlight on the Chevrolet Silverado MK2

Model: Chevrolet Silverado MK 2 - Years 2007-2014
Part: Tail light

In today's tutorial video, you will see how to disassemble and replace the rear headlight on the second generation Chevrolet Silverado by following these simple steps. First, open the tailgate and start by unscrewing the mounting screws of the light, which are located on the sides; then disconnect the bulb connector to completely remove the rear headlight, as illustrated in the video. At this point, replace the headlight with the new one, also replacing the bulbs if necessary; all that's left is to reassemble everything by applying the reverse procedure!

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Chevrolet Silverado
How to Replace the Headlight Bulb on a Chevrolet Silverado
Chevrolet Silverado (2007-2014 / MK 2) To replace the headlight bulb on a Chevrolet Silverado, loosen the screws that secure the headlight assembly. These screws are located on the top and…
How to Replace the Fog Light on a Chevrolet Silverado?
How to Replace the Fog Light on a Chevrolet Silverado?
Chevrolet Silverado (1998-2007 / MK 1) To replace the fog light on a Chevrolet Silverado, access the inside of the front bumper from underneath the vehicle. This will allow you to remove t…
Where to Find the Fuses of the Chevrolet Silverado 2
Where to Find the Fuses of the Chevrolet Silverado 2
Chevrolet Silverado (2007-2014 / MK 2) Knowing the location of the fuses in your Chevrolet Silverado Mk2 is very important as it allows you to intervene safely and effectively in case of f…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos