Do it yourself
| ||||
|
Chevrolet Silverado - Video tutorial
Model: Chevrolet Silverado
MK 3
- Years 2014-2018 In order to replace the rear light bulb of the Chevrolet Silverado, the tailgate of the trunk must be opened so that the screws holding the headlight next to it can be loosened. Once they have been removed, the headlight can be removed from its housing and the bulb placed inside it can be removed by disconnecting the connector at the rear. Once this has been removed, it will be possible to connect the new one to the connector and insert it into its housing. Once inserted, the lighthouse can be re-attached.
Posted on 29 July 2022 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.040
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |