Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb in a Chevrolet Silverado?

Model: Chevrolet Silverado MK 3 - Years: 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

In this video, you can see how to replace the headlight bulb in a Chevrolet Silverado. For the passenger side, first remove the air filter box by unscrewing the 4 mounting screws, disconnecting the sensor connector, and unclipping the base.

Once done, also remove the clips holding the vertical partition. At this point, unscrew the large rear cap of the headlight and extract the bulb holder by turning it counterclockwise about 45 degrees.

Replace the faulty bulb and reassemble everything by following the reverse procedure.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Chevrolet Silverado
How to Replace the Headlight Bulb on a Chevrolet Silverado
Chevrolet Silverado (2007-2014 / MK 2) To replace the headlight bulb on a Chevrolet Silverado, loosen the screws that secure the headlight assembly. These screws are located on the top and…
How to Replace the Rear Headlight Bulb on a Chevrolet Silverado?
How to Replace the Rear Headlight Bulb on a Chevrolet Silverado?
Chevrolet Silverado (2014-2018 / MK 3) To replace the rear headlight bulb on a Chevrolet Silverado, open the trunk to access the screws that secure the headlight next to it. Once these scr…
How to Replace the Rear Headlight on a Chevrolet Silverado?
How to Replace the Rear Headlight on a Chevrolet Silverado?
Chevrolet Silverado (2014-2018 / MK 3) Replacing the rear headlight on a Chevrolet Silverado pickup is a very simple and quick operation. Let's see how to proceed in this tutorial. Start b…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos