Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight on a Chevrolet Silverado?

Model: Chevrolet Silverado MK 3 - Years: 2014, 2015, 2016, 2017, 2018
Part: Tail light

See other generations:
Video tutorial

Replacing the rear headlight on a Chevrolet Silverado pickup is a very simple and quick operation. Let's see how to proceed in this tutorial.

Start by opening the tailgate. Locate the two side mounting screws for the headlight and remove them using a T20 Torx wrench.

Once done, grab the headlight and pull it towards the rear of the vehicle to release the two internal clips. Next, remove the bulb sockets by turning them counterclockwise and insert them into the replacement headlight.

Secure the new headlight to the body by simply following the reverse procedure.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

Replace the Rear Headlight on the Chevrolet Silverado MK2
Replace the Rear Headlight on the Chevrolet Silverado MK2
Chevrolet Silverado (2007-2014 / MK 2) In today's tutorial video, you will see how to disassemble and replace the rear headlight on the second generation Chevrolet Silverado by following t…
How to Replace the Air Filter on a Chevrolet Silverado 2
How to Replace the Air Filter on a Chevrolet Silverado 2
Chevrolet Silverado (2007-2014 / MK 2) In this mini guide for your Chevrolet Silverado Mk2 (model years 2007-2014), discover the steps you need to follow to correctly replace the engine ai…
How to Replace the Windshield Wiper Blades on a Chevrolet Silverado?
How to Replace the Windshield Wiper Blades on a Chevrolet Silverado?
Chevrolet Silverado (2014-2018 / MK 3) To replace the windshield wiper blades on a Chevrolet Silverado, lift the wiper arm so that the blades do not touch the windshield. Now, using a tool…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos