Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Chevrolet Silverado

Model: Chevrolet Silverado MK 2 - Years 2007-2014
Part: Light bulb

To replace the headlight bulb on a Chevrolet Silverado, loosen the screws that secure the headlight assembly. These screws are located on the top and can only be accessed by opening the hood. Once these screws are loosened, remove the screws securing the assembly from the bottom by accessing them through the corresponding wheel well. After the headlight assembly is freed, it can be pulled out of its housing, and the connector at the back can be disconnected. This way, the old bulb can be replaced, and all parts can be reassembled.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb in a Chevrolet Silverado?
How to Replace the Headlight Bulb in a Chevrolet Silverado?
Chevrolet Silverado (2014-2018 / MK 3) In this video, you can see how to replace the headlight bulb in a Chevrolet Silverado. For the passenger side, first remove the air filter box by uns…
How to Replace the Headlight Bulb on a Chevrolet Silverado
How to Replace the Headlight Bulb on a Chevrolet Silverado
Chevrolet Silverado (2007-2014 / MK 2) This guide explains the necessary steps to replace the headlight bulb (passenger side) on a Chevrolet Silverado. It is not a very complex maintenance…
How to Install a LED Reverse Light on Chevrolet Silverado [USA]
How to Install a LED Reverse Light on Chevrolet Silverado [USA]
Chevrolet Silverado (2014-2018 / MK 3) To replace the reverse light bulb on the Chevrolet Silverado, follow these steps: open the tailgate. On the inside of the light assembly, there is a …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos