Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Spare Tire from a Chevrolet Silverado

Model: Chevrolet Silverado MK 2 - Years 2007-2014
Part: Wheel

The video shows how to remove the spare tire from a Chevrolet Silverado. This is a fairly simple task that can be done in just a few minutes independently. Take the jack from under the vehicle and insert it into the hole. Turn counterclockwise to lower the chain that holds the spare tire. Then use a jack that can extend, placed on two blocks, to press the center button and release the spare tire, which is now ready to be used. For using the jack, refer to the instruction manual.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of a Chevrolet Silverado
How to Remove the Door Panel of a Chevrolet Silverado
Chevrolet Silverado (1998-2007 / MK 1) Removing the inner door panel of the right front door of a Chevrolet Silverado is a straightforward task. Use appropriate tools to pry off all the ha…
How to Replace the Front Brake Pads on the Chevrolet Silverado?
How to Replace the Front Brake Pads on the Chevrolet Silverado?
Chevrolet Silverado (2007-2014 / MK 2) To replace the brake pads on the Chevrolet Silverado, lift the vehicle so you can loosen the bolts securing the corresponding wheel. Once the bolts a…
How to remove the door moldings of the Chevrolet Silverado 3500 HD
How to remove the door moldings of the Chevrolet Silverado 3500 HD
Chevrolet Silverado (2019-2026 / MK 1) Today we will explain how to remove the moldings placed on the front and rear doors of the Chevrolet Silverado. To perform this operation, we need to…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos