Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on the Chevrolet Silverado?

Model: Chevrolet Silverado MK 2 - Years 2007-2014
Part: Brake pads

To replace the brake pads on the Chevrolet Silverado, lift the vehicle so you can loosen the bolts securing the corresponding wheel. Once the bolts are removed, you can completely take off the wheel to access the caliper underneath. This must be detached from the brake rotor by unscrewing its corresponding bolts: this way, you can slide out the old pads inside and replace them with new replacement parts. After the replacement, reinstall all the removed parts.

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Chevrolet Silverado
How to Replace the Front Brake Pads on a Chevrolet Silverado
Chevrolet Silverado (1998-2007 / MK 1) Follow this guide to remove and replace the front brake pads on a Chevrolet Silverado in simple and quick steps. First, lift the vehicle with a jack …
How to Replace the Brake Pedal Switch on a Chevrolet Silverado
How to Replace the Brake Pedal Switch on a Chevrolet Silverado
Chevrolet Silverado (2007-2014 / MK 2) To replace the brake pedal switch on a Chevrolet Silverado, you need to completely remove the plastic panel of the dashboard located directly behind …
How to Replace the Front Logo on a Chevrolet Silverado
How to Replace the Front Logo on a Chevrolet Silverado
Chevrolet Silverado (2014-2018 / MK 3) In this video, we will see an aesthetic modification rather than a functional one on the Chevrolet Silverado, an American pickup. We will replace the…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos