Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing/Reinstalling the Shocks on a Chevrolet Silverado.

Model: Chevrolet Silverado MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Shocks

See other generations:
Video tutorial

Before removing the front shocks on a Chevrolet Silverado, secure the vehicle on a lift or a flat surface, ensuring stability and safety. This precaution should be taken whenever performing maintenance on a vehicle to protect the operator's safety.

Now, remove the front tire corresponding to the shock to be removed and open the hood. Next, unscrew the nut that secures the top of the shock, and then unscrew the bolt that secures the bottom.

Use the same procedure for the rear shocks, which are located at the lower/inner part of the vehicle, near the rear axle.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

How to Remove the Headrest from a Chevrolet Silverado?
How to Remove the Headrest from a Chevrolet Silverado?
Chevrolet Silverado (2019-2026 / MK 1) Removing the headrest from a Chevrolet Silverado is very simple and quick. Follow this tutorial, which is applicable to many other models from the Am…
How to Connect Your Smartphone to the Chevrolet Silverado
How to Connect Your Smartphone to the Chevrolet Silverado
Chevrolet Silverado (2014-2018 / MK 3) To quickly and correctly connect your smartphone to the radio of the Chevrolet Silverado, simply follow the instructions in this new mini guide. Firs…
How to Replace the Air Filter on a Chevrolet Silverado 2
How to Replace the Air Filter on a Chevrolet Silverado 2
Chevrolet Silverado (2007-2014 / MK 2) In this mini guide for your Chevrolet Silverado Mk2 (model years 2007-2014), discover the steps you need to follow to correctly replace the engine ai…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos