Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Silverado
    4. : Door panel

Chevrolet Silverado - Door panel

Chevrolet Silverado (1998-2007 / MK 1)
How to remove the door panel of a Chevrolet Silverado
The removal of the inner panel of the right front door of a Chevrolet Silverado is a very simple operation. You will need to use specific tools to pry off all …read all…
Posted on 14 January 2024 by ScegliAuto
Chevrolet Silverado (2007-2014 / MK 2)
How do you remove the door panel from the Chevrolet Silverado?
Removal of the Chevrolet Silverado door panel is done by detaching the molding which is located along the entire door handrail. Once this molding has been …read all…
Posted on 22 September 2022 by ScegliAuto
Chevrolet Silverado (2007-2014 / MK 2)
How do you remove the door panel from the Chevrolet Silverado?
To remove the door panel of the Chevrolet Silverado it is necessary to detach the molding which is located on the handrail and loosen the screws underneath, so …read all…
Posted on 16 June 2022 by ScegliAuto
Chevrolet Silverado (2014-2018 / MK 3)
How to remove the door panel of the Chevrolet Silverado Mk3
The guide shows how to remove the door panel of the Chevrolet Silverado Mk3. The first operation to carry out is to remove the finishing panels inside the …read all…
Posted on 10 April 2024 by ScegliAuto
Airbags (2) Loudspeaker (1) Shock absorbers (1) Antenna (3) Air conditioning (1) Car stereo (4) Battery (11) Key (10) Air conditioning controls (1) -board computer (5) Checks and maintenance (6) Rear bench seat (1) Headlight (5) Tail light (2) Fog lights (1) Air filter (4) Cabin air filter (6) Diesel filter (5) Grille (1) Light bulb (2) Headlight bulb (4) Rear light bulb (1) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (1) Handle (4) Engine oil (7) Door panel (4) Front bumper (1) Brake pads (2) Fuel pump (5) Door (2) Instrument cluster (5) Passenger compartment heating radiator (1) Wheel (1) Fuse box (5) Seat (4) Crankshaft RPM sensor (1) Lambda sensor (1) Outside rearview mirror (3) Manufacturer's coat of arms (2) Windscreen wipers (3) Thermostat (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos