Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Silverado
    4. : Outside rearview mirror

Chevrolet Silverado - Outside rearview mirror

Chevrolet Silverado (2007-2014 / MK 2)
How to replace the exterior mirrors with reversing lights on the Chevrolet Silverado Mk2
The guide shows how to replace the exterior rearview mirror of the Chevrolet Silverado Mk2 1500. The first operation to perform is to remove, with the aid of a …read all…
Posted on 28 October 2022 by ScegliAuto
Chevrolet Silverado (1998-2007 / MK 1)
Chevrolet Silverad exterior mirror replacement
Today we will see, in this video tutorial, how to remove and replace the exterior rearview mirror of the Chevrolet Silverado, in simple and quick steps. First …read all…
Posted on 21 April 2024 by ScegliAuto
Chevrolet Silverado (2007-2014 / MK 2)
Replace the exterior mirror of the Chevrolet Silverado
Let's see in this guide how to remove and replace the exterior rearview mirror of the Chevrolet Silverado, in simple and quick steps. First we open the front …read all…
Posted on 17 April 2024 by ScegliAuto
Airbags (2) Loudspeaker (1) Shock absorbers (1) Antenna (3) Air conditioning (1) Car stereo (4) Battery (11) Key (10) Air conditioning controls (1) -board computer (5) Checks and maintenance (6) Rear bench seat (1) Headlight (5) Tail light (2) Fog lights (1) Air filter (4) Cabin air filter (6) Diesel filter (5) Grille (1) Light bulb (2) Headlight bulb (4) Rear light bulb (1) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (1) Handle (4) Engine oil (7) Door panel (4) Front bumper (1) Brake pads (2) Fuel pump (5) Door (2) Instrument cluster (5) Passenger compartment heating radiator (1) Wheel (1) Fuse box (5) Seat (4) Crankshaft RPM sensor (1) Lambda sensor (1) Outside rearview mirror (3) Manufacturer's coat of arms (2) Windscreen wipers (3) Thermostat (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos