Do it yourself
Frequently asked questions about cars and motorcycles

Chevrolet Silverado - Fuse box

Chevrolet Silverado (1998-2007 / MK 1)
Where is the fuse box located in the Chevrolet Silverado?

The Chevrolet Silverado mk1 model has two fuse boxes and a relay inside. The first fuse box is located inside the cabin, specifically at the end of the …read all…
Posted on 22 March 2024 by ScegliAuto
Chevrolet Silverado (2007-2014 / MK 2)
Where are the fuses located for the Chevrolet Silverado 2?

Knowing the location of the fuses in your Chevrolet Silverado Mk2 is very important as it allows you to intervene in a targeted and safe manner in case of any …read all…
Posted on 6 March 2024 by ScegliAuto
Chevrolet Silverado (2007-2014 / MK 2)
What is the fuse diagram for the Chevrolet Silverado pickup truck?

If any devices in our Chevrolet Silverado pickup truck have suddenly stopped working, we can first check the status of the corresponding fuses, the diagrams of …read all…
Posted on 12 February 2024 by ScegliAuto
Chevrolet Silverado (2014-2018 / MK 3)
Fuse diagram for the Chevrolet Silverado 1500

Let's see through this very short video guide today the location of the fuse boxes inside a third-generation Chevrolet Silverado 1500, a model in production …read all…
Posted on 3 November 2023 by ScegliAuto
Chevrolet Silverado (1998-2007 / MK 1)
Where are the fuses on the Chevrolet Silverado located?

In the Chevrolet Silverado, the fuses are divided into the appropriate fuse boxes that are present in the vehicle. In this car model there are two: the first …read all…
Posted on 7 December 2022 by ScegliAuto

Airbags (2) Loudspeaker (1) Shock absorbers (1) Antenna (3) Air conditioning (1) Car stereo (4) Battery (11) Key (10) Air conditioning controls (1) -board computer (5) Checks and maintenance (6) Rear bench seat (1) Headlight (5) Tail light (2) Fog lights (1) Air filter (4) Cabin air filter (6) Diesel filter (5) Grille (1) Light bulb (2) Headlight bulb (4) Rear light bulb (1) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (1) Handle (4) Engine oil (7) Door panel (4) Front bumper (1) Brake pads (2) Fuel pump (5) Door (2) Instrument cluster (5) Passenger compartment heating radiator (1) Wheel (1) Fuse box (5) Seat (4) Crankshaft RPM sensor (1) Lambda sensor (1) Outside rearview mirror (3) Manufacturer's coat of arms (2) Windscreen wipers (3) Thermostat (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos