Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Silverado
    4. : Windscreen wipers

Chevrolet Silverado - Windscreen wipers

Chevrolet Silverado (1998-2007 / MK 1)
How to replace the front windshield wipers of the Chevrolet Silverado
In this video tutorial, we will see how to disassemble and replace the front windshield wipers of the Chevrolet Silverado, in simple and quick steps. First, …read all…
Posted on 29 June 2023 by ScegliAuto
Chevrolet Silverado (2014-2018 / MK 3)
How do you replace the wiper blades on the Chevrolet Silverado?
In order to replace the wiper blades on the Chevrolet Silverado, you have to lift the wiper arm so that the wiper blades do not touch the windshield. Now, …read all…
Posted on 13 September 2022 by ScegliAuto
Chevrolet Silverado (2014-2018 / MK 3)
How to replace the front wipers on the Chevrolet Silverado
Let's see in this short and simple guide how to remove and replace the front wipers of the Chevrolet Silverado. First, let's move to the front of our car and …read all…
Posted on 18 April 2024 by ScegliAuto
Airbags (2) Loudspeaker (1) Shock absorbers (1) Antenna (3) Air conditioning (1) Car stereo (4) Battery (11) Key (10) Air conditioning controls (1) -board computer (5) Checks and maintenance (6) Rear bench seat (1) Headlight (5) Tail light (2) Fog lights (1) Air filter (4) Cabin air filter (6) Diesel filter (5) Grille (1) Light bulb (2) Headlight bulb (4) Rear light bulb (1) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (1) Handle (4) Engine oil (7) Door panel (4) Front bumper (1) Brake pads (2) Fuel pump (5) Door (2) Instrument cluster (5) Passenger compartment heating radiator (1) Wheel (1) Fuse box (5) Seat (4) Crankshaft RPM sensor (1) Lambda sensor (1) Outside rearview mirror (3) Manufacturer's coat of arms (2) Windscreen wipers (3) Thermostat (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos