Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Silverado
    4. : -board computer

Chevrolet Silverado - -board computer

Chevrolet Silverado (2014-2018 / MK 3)
How to reset the oil change light in the Chevrolet Silverado
The oil change warning light warns the motorist of the need to carry out this maintenance operation once a certain number of kilometers have been traveled. …read all…
Posted on 15 October 2022 by ScegliAuto
Chevrolet Silverado (1998-2007 / MK 1)
How to reset the oil light on the Chevrolet Silverado
If the warning light relating to the oil change appears even after having carried out this operation, then you necessarily need to reset the sensor manually …read all…
Posted on 4 December 2022 by ScegliAuto
Chevrolet Silverado (2007-2014 / MK 2)
How to reset the maintenance light on the 2011 Chevrolet Silverado
After having changed the engine oil and the respective filter inside your 2011 Chevrolet Silverado it is important to reset the warning light so as to avoid it …read all…
Posted on 8 May 2024 by ScegliAuto
Chevrolet Silverado (2014-2018 / MK 3)
How to reset the oil warning light on Chevrolet Silverado
In this video tutorial you can see how you can reset the oil warning light on Chevrolet Silverado by following a few simple steps that will guide you towards …read all…
Posted on 19 April 2024 by ScegliAuto
Chevrolet Silverado (2019-2024 / MK 1)
How to reset the oil warning light on the Chevrolet Silverado
The procedure required to reset the Chevrolet Silverado engine oil change light is quite simple. Just follow the following instructions to the letter and you …read all…
Posted on 16 April 2024 by ScegliAuto
Airbags (2) Loudspeaker (1) Shock absorbers (1) Antenna (3) Air conditioning (1) Car stereo (4) Battery (11) Key (10) Air conditioning controls (1) -board computer (5) Checks and maintenance (6) Rear bench seat (1) Headlight (5) Tail light (2) Fog lights (1) Air filter (4) Cabin air filter (6) Diesel filter (5) Grille (1) Light bulb (2) Headlight bulb (4) Rear light bulb (1) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (1) Handle (4) Engine oil (7) Door panel (4) Front bumper (1) Brake pads (2) Fuel pump (5) Door (2) Instrument cluster (5) Passenger compartment heating radiator (1) Wheel (1) Fuse box (5) Seat (4) Crankshaft RPM sensor (1) Lambda sensor (1) Outside rearview mirror (3) Manufacturer's coat of arms (2) Windscreen wipers (3) Thermostat (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos