Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Chevrolet Silverado - Handle

Chevrolet Silverado (2007-2014 / MK 2)
How to replace the external handle of the front door of the Chevrolet Silverado.
Briefly, we will see step-by-step instructions for disassembling and replacing the outer handle of the front door of the Chevrolet Silverado. First, we open …read all…
Posted on 8 September 2023 by ScegliAuto
Chevrolet Silverado (2007-2014 / MK 2)
How to replace the exterior door handle of the Chevrolet Silverado 2
Let's see in this tutorial how to remove and replace the external door handle of the second series Chevrolet Silverado. First we open the front door and start …read all…
Posted on 4 August 2022 by ScegliAuto
Chevrolet Silverado (2007-2014 / MK 2)
How do you replace the inside handle of the Chevrolet Silverado?
In order to replace the interior handle of the Chevrolet Silverado, you have to remove the door panel corresponding to the handle to be replaced. In order to …read all…
Posted on 15 May 2024 by ScegliAuto
Chevrolet Silverado (2014-2018 / MK 3)
How to replace the exterior door handle of the Chevrolet Silverado MK3
Let's see in this video how to remove and replace the external door handle on the Chevrolet Silverado third series, following these simple steps. First we open …read all…
Posted on 23 March 2024 by ScegliAuto
Airbags (2) Loudspeaker (1) Shock absorbers (1) Antenna (3) Air conditioning (1) Car stereo (4) Battery (11) Key (10) Air conditioning controls (1) -board computer (5) Checks and maintenance (6) Rear bench seat (1) Headlight (5) Tail light (2) Fog lights (1) Air filter (4) Cabin air filter (6) Diesel filter (5) Grille (1) Light bulb (2) Headlight bulb (4) Rear light bulb (1) Interior lights ceiling light bulb (1) License plate light (1) Third brake light (1) Handle (4) Engine oil (7) Door panel (4) Front bumper (1) Brake pads (2) Fuel pump (5) Door (2) Instrument cluster (5) Passenger compartment heating radiator (1) Wheel (1) Fuse box (5) Seat (4) Crankshaft RPM sensor (1) Lambda sensor (1) Outside rearview mirror (3) Manufacturer's coat of arms (2) Windscreen wipers (3) Thermostat (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos