Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exterior Door Handle on a Chevrolet Silverado 1500

Model: Chevrolet Silverado MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Handle

See other generations:
Video tutorial

In this tutorial, learn how to remove and replace the exterior door handle on a Chevrolet Silverado 1500. First, open the front door and start by removing the door panel; to do this, remove all the mounting screws you find on it, disconnecting the electrical connector for the switch panel.

At this point, release the exterior handle opening mechanism by removing the screws found inside the holes with a 10 mm socket wrench; remove the handle from the outside and replace it with the new one of the correct type!


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How to Replace the Interior Handle on a Chevrolet Silverado?
How to Replace the Interior Handle on a Chevrolet Silverado?
Chevrolet Silverado (2007-2014 / MK 2) To replace the interior handle on a Chevrolet Silverado, you need to remove the door panel corresponding to the handle being replaced. To do this, un…
How to Replace the Exterior Door Handle on a Chevrolet Silverado
How to Replace the Exterior Door Handle on a Chevrolet Silverado
Chevrolet Silverado (2007-2014 / MK 2) Follow these step-by-step instructions to remove and replace the exterior door handle on a Chevrolet Silverado. First, open the front door and start …
How to Replace the Exterior Door Handle on a Chevrolet Silverado MK3
How to Replace the Exterior Door Handle on a Chevrolet Silverado MK3
Chevrolet Silverado (2014-2018 / MK 3) In this video, we will see how to remove and replace the exterior door handle on a third-generation Chevrolet Silverado by following these simple ste…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos