Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Outside Rearview Mirror on a Chevrolet Silverado

Model: Chevrolet Silverado MK 1 - Years 1998-2007
Part: Side mirror

Today, we will see, in this video tutorial, how to remove and replace the outside rearview mirror on a Chevrolet Silverado, in simple and quick steps. First, open the front door and start by removing the door panel, unscrewing all the screws you find on it and removing the window switch panel; then unscrew three screws of the outside rearview mirror, also disconnecting the electrical connector by pulling it from the outside. Now perform the replacement of the rearview mirror, following the video until the end for reassembly!

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Outside Rearview Mirror on the Chevrolet Silverado
Replace the Outside Rearview Mirror on the Chevrolet Silverado
Chevrolet Silverado (2007-2014 / MK 2) This guide shows you how to remove and replace the outside rearview mirror on the Chevrolet Silverado in simple and quick steps. First, open the fron…
How to Replace the Side Mirrors with Backup Lights on the Chevrolet Silverado Mk2
How to Replace the Side Mirrors with Backup Lights on the Chevrolet Silverado Mk2
Chevrolet Silverado (2007-2014 / MK 2) This guide shows how to replace the external rearview mirror on the Chevrolet Silverado Mk2 1500. First, remove the cover of the mirror base using a …
Where to Find the Fuses of the Chevrolet Silverado 2
Where to Find the Fuses of the Chevrolet Silverado 2
Chevrolet Silverado (2007-2014 / MK 2) Knowing the location of the fuses in your Chevrolet Silverado Mk2 is very important as it allows you to intervene safely and effectively in case of f…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos