Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Silverado
    4. : Replace the exterior mirror of the Chevrolet Silverado

Chevrolet Silverado - Video tutorial

Model: Chevrolet Silverado MK 2 - Years 2007-2014
Part: Outside rearview mirror
Operation: Replace the exterior mirror of the Chevrolet Silverado

Let's see in this guide how to remove and replace the exterior rearview mirror of the Chevrolet Silverado, in simple and quick steps. First we open the front door and start by disassembling and removing the door panel, removing the various plastic caps and unscrewing the screws that we find on it, as shown in the video. At this point we disconnect the electric connector of the mirror and unscrew the fixing screws, using a socket wrench, to remove it from the outside; let's replace it with the new one, applying the reverse procedure for reassembly!


Posted on 17 April 2024 by ScegliAuto



Chevrolet Silverad exterior mirror replacement
Chevrolet Silverado (1998-2007 / MK 1) Today we will see, in this video tutorial, how to remove and replace the exterior rearview mirror of the Chevrolet Silverado, in simple and quick ste
How to replace the exterior mirrors with reversing lights on the Chevrolet Silverado Mk2
Chevrolet Silverado (2007-2014 / MK 2) The guide shows how to replace the exterior rearview mirror of the Chevrolet Silverado Mk2 1500. The first operation to perform is to remove, with th
How to replace the exterior door handle of the Chevrolet Silverado MK3
Chevrolet Silverado (2014-2018 / MK 3) Let's see in this video how to remove and replace the external door handle on the Chevrolet Silverado third series, following these simple steps. Fir

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos