Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear window regulator of the Chevrolet Spark.

Model: Chevrolet Spark MK 1, M300 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Window switch

See other generations:
Video tutorial

To replace the rear window regulator of a Chevrolet Spark, we need to follow this procedure: we remove the interior door panel by unscrewing the two hidden screws, one behind the plastic tab and the other under the screw cover; then we take out all the clips along the perimeter of the panel and lift it upwards, disconnecting the electrical connector of the window switch.

If the glass has fallen down, we use a clamp to secure it to the door frame.

This is a crucial step for the safety of the job. The regulator is secured by 10mm bolts, which must be unscrewed; we remove the window motor, unscrew the screws that attach the glass to the regulator's support, and manually lift the glass and secure it again.

We insert the new regulator (and the new motor) into its place, insert and tighten all the 10mm bolts, connect the motor's electrical connector, lower the glass until it aligns with the new regulator's support, and secure it with two screws.

We check that the glass goes up and down correctly: we reconnect the window switch connector and reattach the door panel.


Posted on 18 December 2025 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel of a Chevrolet Spark
How to Remove the Rear Door Panel of a Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) This guide outlines the main steps for removing the rear door panel of a Chevrolet Spark. First, open the front door and start unscrewing all the fas…
Removing the Rear Door Panel on a Chevrolet Spark
Removing the Rear Door Panel on a Chevrolet Spark
Chevrolet Spark (2009-2018 / ) In this video tutorial, you will learn how to remove the rear door panel of a Chevrolet Spark. First, open the rear door and unscrew the fastening sc…
How to Replace the Spark Plugs of a Chevrolet Spark
How to Replace the Spark Plugs of a Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) Begin by opening the bonnet of your Chevrolet Spark. Next, remove the air filter box by unscrewing the fixing screws and disconnecting the various ho…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos