Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs of a Chevrolet Spark

Model: Chevrolet Spark M300, MK 1 - Years 2009-2016
Part: Spark plugs

Begin by opening the bonnet of your Chevrolet Spark. Next, remove the air filter box by unscrewing the fixing screws and disconnecting the various hoses. Once the air filter box is removed, unscrew and take out the bolts securing the connectors to the spark plugs, then disconnect the connectors themselves. After this, you will have access to the spark plugs. At this point, unscrew and remove them from the engine head, completing the disassembly. To fit the new spark plugs in your Chevrolet Spark, repeat this procedure in reverse, and the replacement will be complete.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the spark plugs on a Chevrolet Spark?
How do you replace the spark plugs on a Chevrolet Spark?
Chevrolet Spark (2009-2016 / M300, MK 1) Replacing the spark plugs on your Chevrolet Spark is a simple job that you can do in a few steps. First of all, turn off the engine and let it cool d…
Replace the Ignition Coil for the Spark Plugs on the Chevrolet Spark
Replace the Ignition Coil for the Spark Plugs on the Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) In this tutorial, you will see the steps to remove and replace the ignition coil connected to the spark plugs, which allows the current to pass for t…
Replacement of the spark plugs of the Chevrolet Spark 1.2 16V.
Chevrolet Spark (2009-2016 / M300, MK 1) This short guide will illustrate the main instructions useful for disassembling and replacing the spark plugs of the Chevrolet Spark 1.2 16V engine. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos