Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Spark
    4. : Spark plugs

Chevrolet Spark - Spark plugs

Chevrolet Spark (2009-2016 / MK 1, M300)
How to replace the spark plugs on the Chevrolet Spark.
Today's guide will show us the steps on how to remove and replace the spark plugs of a Chevrolet Spark engine. First, we open the car's engine hood and begin …read all…
Posted on 24 April 2023 by ScegliAuto
Chevrolet Spark (2009-2016 / MK 1, M300)
How to replace the spark plugs on a Chevrolet Spark
Let's start by opening the bonnet of our Chevrolet Spark. Next we will have to disassemble and remove the air filter box, unscrewing the fixing screws and …read all…
Posted on 14 March 2024 by ScegliAuto
Chevrolet Spark (2009-2018 / )
Chevrolet Spark spark plug replacement
Replacing the spark plugs is a maintenance that is often neglected and is carried out only when the first starting or idle maintenance problems begin to arise: …read all…
Posted on 11 December 2023 by ScegliAuto
Chevrolet Spark (2009-2018 / )
How to replace the Chevrolet Spark spark plugs
Unclip and lift the hood, the first step will be to disconnect the plugs from the battery to protect all electronic equipment. Now you have to go to remove the …read all…
Posted on 25 September 2023 by ScegliAuto
Loudspeaker (1) Antenna (1) Car stereo (2) Battery (2) Coil (1) Spark plugs (4) Key (4) Timing belt (2) -board computer (1) Checks and maintenance (4) Dashboard (1) Bearing (1) Headlight (2) Tail light (1) Air filter (1) Cabin air filter (1) Petrol filter (1) Oil filter (1) Clutch (1) Accessory Kit (1) Light bulb (2) Headlight bulb (4) Rear light bulb (1) Interior lights ceiling light bulb (1) Engine oil (1) Door panel (5) Brake pads (1) Gear Shift Knob (7) Fuel pump (3) Instrument cluster (2) Radiator (1) Fuse box (7) Outside rearview mirror (3) EGR valve (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos