Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Spark
    4. : Door panel

Chevrolet Spark - Door panel

Chevrolet Spark (2009-2016 / MK 1, M300)
How to disassemble the rear door panel of the Chevrolet Spark
In this guide, we will see the main steps useful for disassembling the rear door panel of the Chevrolet Spark. First of all, we open the front door and start …read all…
Posted on 26 March 2024 by ScegliAuto
Chevrolet Spark (2009-2016 / MK 1, M300)
How to remove the door panel of the Chevrolet Spark?
Let's discover the main and necessary instructions on how to disassemble and replace the rear door panel of the Chevrolet Spark. First, open the front door and …read all…
Posted on 31 October 2023 by ScegliAuto
Chevrolet Spark (2009-2018 / )
Removing the Chevrolet Spark rear door panel
In this video tutorial we will see how to remove the rear door panel of a Chevrolet Spark. First of all, we open the rear door and unscrew the fixing screw …read all…
Posted on 10 February 2024 by ScegliAuto
Chevrolet Spark (2009-2018 / )
How to remove Chevrolet Spark door panel
Does the door panel on Chevrolet Spark need to be changed? Let's see how it disassembles. We disconnect the battery terminals located in the engine compartment …read all…
Posted on 4 December 2023 by ScegliAuto
Chevrolet Spark (2009-2018 / )
Remove the front door panel on Chevrolet Spark
We perform the disassembly of the left front door panel on Chevrolet Spark. With a screwdriver we unscrew the screws placed in the space of the upper lever of …read all…
Posted on 28 November 2023 by ScegliAuto
Loudspeaker (1) Antenna (1) Car stereo (2) Battery (2) Coil (1) Spark plugs (4) Key (4) Timing belt (2) -board computer (1) Checks and maintenance (4) Dashboard (1) Bearing (1) Headlight (2) Tail light (1) Air filter (1) Cabin air filter (1) Petrol filter (1) Oil filter (1) Clutch (1) Accessory Kit (1) Light bulb (2) Headlight bulb (4) Rear light bulb (1) Interior lights ceiling light bulb (1) Engine oil (1) Door panel (5) Brake pads (1) Gear Shift Knob (7) Fuel pump (3) Instrument cluster (2) Radiator (1) Fuse box (7) Outside rearview mirror (3) EGR valve (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos