Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Chevrolet Spark

Model: Chevrolet Spark MK 1, M300 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Door trim panel

See other generations:
Video tutorial

Follow these essential instructions to dismantle and replace the rear hatch panel of the Chevrolet Spark. First, open the front door and start unscrewing all the fixing screws found on the opening handle and the sides of the door panel; then gently detach the panel from the sides until it is completely removed, as shown in the video.

At this point, disconnect the opening handle cable; if necessary, replace the door panel with a new one, then secure it with all its original screws and ensure the handle operates correctly.


Updated on 25 August 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel of a Chevrolet Spark
How to Remove the Rear Door Panel of a Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) This guide outlines the main steps for removing the rear door panel of a Chevrolet Spark. First, open the front door and start unscrewing all the fas…
Removing the Front Door Panel on a Chevrolet Spark
Removing the Front Door Panel on a Chevrolet Spark
Chevrolet Spark (2009-2018 / ) Carry out the removal of the left front door panel on a Chevrolet Spark. Use a screwdriver to undo the screws located in the space of the upper door …
How to Remove the Door Panel on a Chevrolet Spark
How to Remove the Door Panel on a Chevrolet Spark
Chevrolet Spark (2009-2018 / ) Is the door panel on your Chevrolet Spark due for replacement? Here’s how to remove it. Disconnect the battery terminals located in the engine bay (i…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos