Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel of a Chevrolet Spark

Model: Chevrolet Spark M300, MK 1 - Years 2009-2016
Part: Door trim panel

This guide outlines the main steps for removing the rear door panel of a Chevrolet Spark. First, open the front door and start unscrewing all the fastening screws found on the door panel; then, pry at the sides to detach and remove it, finally disconnecting the handle cable as shown in the video. At this point, you will have access to the inside of the door, as well as the lock, window, and speaker; refit the door panel by applying the reverse procedure!

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Door Panel on a Chevrolet Spark
Removing the Rear Door Panel on a Chevrolet Spark
Chevrolet Spark (2009-2018 / ) .. In this video tutorial, you will learn how to remove the rear door panel of a Chevrolet Spark. First, open the rear door and unscrew the fastening.. …
How to Remove the Door Panel on a Chevrolet Spark
How to Remove the Door Panel on a Chevrolet Spark
Chevrolet Spark (2009-2018 / ) Is the door panel on your Chevrolet Spark due for replacement? Here’s how to remove it. Disconnect the battery terminals located in the engine bay (i…
Removing the Front Door Panel on a Chevrolet Spark
Removing the Front Door Panel on a Chevrolet Spark
Chevrolet Spark (2009-2018 / ) Carry out the removal of the left front door panel on a Chevrolet Spark. Use a screwdriver to undo the screws located in the space of the upper door …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos