Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Door Panel on a Chevrolet Spark

Model: Chevrolet Spark - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the rear door panel of a Chevrolet Spark. First, open the rear door and unscrew the fastening screw found in the grab handle; then pry off the upper plastic of the panel to remove it, detaching it from the clips.

At this point, remove the window lift handle by prying and removing the retaining clip, and then pry at the sides of the panel to extract it, as shown in the video. Once the panel is removed, disconnect the handle cable and you're done!


Updated on 16 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel of a Chevrolet Spark
How to Remove the Rear Door Panel of a Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) This guide outlines the main steps for removing the rear door panel of a Chevrolet Spark. First, open the front door and start unscrewing all the fas…
Removing the Front Door Panel on a Chevrolet Spark
Removing the Front Door Panel on a Chevrolet Spark
Chevrolet Spark (2009-2018 / ) Carry out the removal of the left front door panel on a Chevrolet Spark. Use a screwdriver to undo the screws located in the space of the upper door …
How to disassemble the external handle of the rear door of the Chevrolet Spark
How to disassemble the external handle of the rear door of the Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) The following steps will allow us to disassemble and replace the external handle of the rear door of the Chevrolet Spark. First, we open the rear doo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos