Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Chevrolet Spark

Model: Chevrolet Spark - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

Is the door panel on your Chevrolet Spark due for replacement? Here’s how to remove it. Disconnect the battery terminals located in the engine bay (if you need to cut wires). Remove the screw cover cap located in the lever space, then use a screwdriver to undo the screws in the upper door opening lever area.

Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away by hand and unclip it from the door (disconnect the power wiring and the opening cable).

Fit the new cover panel.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel of a Chevrolet Spark
How to Remove the Rear Door Panel of a Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) This guide outlines the main steps for removing the rear door panel of a Chevrolet Spark. First, open the front door and start unscrewing all the fas…
Removing the Front Door Panel on a Chevrolet Spark
Removing the Front Door Panel on a Chevrolet Spark
Chevrolet Spark (2009-2018 / ) Carry out the removal of the left front door panel on a Chevrolet Spark. Use a screwdriver to undo the screws located in the space of the upper door …
Removing the Rear Door Panel on a Chevrolet Spark
Removing the Rear Door Panel on a Chevrolet Spark
Chevrolet Spark (2009-2018 / ) In this video tutorial, you will learn how to remove the rear door panel of a Chevrolet Spark. First, open the rear door and unscrew the fastening sc…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos