Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Battery on Chevrolet Spark

Model: Chevrolet Spark - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

To lift the bonnet, pull the lever inside the cabin (at the bottom left in the driver's area), move the central latch, and raise it, then place the support rod. To remove the battery, always start by unscrewing the negative terminal and disconnecting it, and only then move on to the positive terminal.

For the positive, you must first open the red latch and then unscrew the small side screw.

Nothing could be easier! Remove the old battery and insert the new one you have purchased, then proceed in reverse order for the two terminals and during reassembly.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Chevrolet Spark?
How to Replace the Battery in a Chevrolet Spark?
Chevrolet Spark (2009-2016 / MK 1, M300) To replace the battery in a Chevrolet Spark, open the bonnet to access the components in the engine bay. On the right side, at the central height, lo…
How to Replace the Key Battery of the 2013 Chevrolet Spark Aveo
How to Replace the Key Battery of the 2013 Chevrolet Spark Aveo
Chevrolet Spark (2009-2016 / MK 1, M300) To correctly replace the battery of your 2013 Chevrolet Spark Aveo key, follow these simple steps. First, obtain a small crosshead screwdriver and us…
Guide to Replacing the Timing Belt on a Chevrolet Spark
Guide to Replacing the Timing Belt on a Chevrolet Spark
Chevrolet Spark (2009-2016 / MK 1, M300) This guide provides instructions to dismantle and replace the timing belt on a Chevrolet Spark. First, open the engine bonnet and start by removing t…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos