Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Chevrolet Trax

Model: Chevrolet Trax - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Battery

See other generations:
Video tutorial

To replace the battery on a Chevrolet Trax, open the bonnet and locate the battery in the engine bay. Turn off the vehicle completely and disconnect the negative terminal first, followed by the positive terminal. Remove the bracket or support holding the battery and lift it out carefully.

Place the new battery in the same housing, ensuring it is correctly oriented, and secure it with the bracket. Connect the positive terminal first, then the negative, tightening the terminals well.

Turn on the ignition and check that the system operates normally without error messages.


Posted on 4 November 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery in a Chevrolet Trax
How to Replace the Key Battery in a Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) To correctly replace the button battery located inside the smart key of your Chevrolet Trax, follow these simple steps. First, obtain a flat screwdri…
How to Replace the Remote Battery of the Chevrolet Trax?
How to Replace the Remote Battery of the Chevrolet Trax?
Chevrolet Trax (2013-2022 / MK 1) Replacing the remote battery of the Chevrolet Trax, as shown in this tutorial, is an extremely simple and quick operation. You will need a replacemen…
How to Replace the Key Battery for the Chevrolet Trax
How to Replace the Key Battery for the Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) The most expensive solution is not always the right one. In fact, this could be the case for your smart key for the Chevrolet Trax. Often, an unexpec…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos