Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on the Chevy Trax

Model: Chevrolet Trax MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Battery

See other generations:
Video tutorial

If you want to proceed with the battery replacement on this car in DIY mode, you will find the information on how to do so in the description below. First, open the bonnet and locate the battery, which is on the left side.

Then remove the battery hold-down bracket and disconnect the negative terminal first, followed by the positive terminal. At this point, you can extract the battery from its housing and then proceed to install the new one, connecting the positive terminal first and then the negative, and finally reposition the support bracket.


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Chevy Trax
How to Replace the Air Filter on a Chevy Trax
Chevrolet Trax (2013-2022 / MK 1) If you want to DIY the air filter replacement on this vehicle, follow the instructions below and you can also check the video. Once the bonnet is ope…
How to Change the Engine Oil and Filter on the Chevy Trax
How to Change the Engine Oil and Filter on the Chevy Trax
Chevrolet Trax (2013-2022 / MK 1) Are you ready to change the engine oil and filter on this model? The description below contains all the necessary instructions and steps to carry out…
How to Replace the Key Battery in a Chevrolet Trax
How to Replace the Key Battery in a Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) To correctly replace the button battery located inside the smart key of your Chevrolet Trax, follow these simple steps. First, obtain a flat screwdri…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos