Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Chevy Trax

Model: Chevrolet Trax MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Air filter

See other generations:
Video tutorial

If you want to DIY the air filter replacement on this vehicle, follow the instructions below and you can also check the video. Once the bonnet is open, locate the box containing the filter on the right side, then unscrew the fixing screws of the upper cover to lift it and access the compartment containing the filter for removal and replacement with the new one. After that, reposition the cover and screw in the two fixing screws, and you're done.


Updated on 15 July 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Filter on the Chevy Trax
How to Change the Engine Oil and Filter on the Chevy Trax
Chevrolet Trax (2013-2022 / MK 1) Are you ready to change the engine oil and filter on this model? The description below contains all the necessary instructions and steps to carry out…
How to replace the cabin air filter of the Chevrolet Trax
How to replace the cabin air filter of the Chevrolet Trax
Chevrolet Trax (2023-2026 / MK 2) In this guide we will see the instructions that will allow us to remove and replace the cabin air filter of the Chevrolet Trax. First of all, we open…
How to Replace the Battery on the Chevy Trax
How to Replace the Battery on the Chevy Trax
Chevrolet Trax (2013-2022 / MK 1) If you want to proceed with the battery replacement on this car in DIY mode, you will find the information on how to do so in the description below. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos