Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter of the Chevrolet Trax

Model: Chevrolet Trax MK 2 - Years: 2023, 2024, 2025, 2026
Part: Cabin air filter

See other generations:
Video tutorial

In this guide we will see the instructions that will allow us to remove and replace the cabin air filter of the Chevrolet Trax. First of all, we open the front passenger side door and start to open the glove compartment; then we release the two side rods to lower it, thus accessing the pollen filter box, as shown in the video.

At this point, we remove the rectangular cover to later remove the filter cartridge by installing the new one (inserting it in the correct direction); all that remains is to reassemble the glove compartment!


Posted on 30 August 2025 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter in the Chevrolet Trax?
How to Replace the Cabin Filter in the Chevrolet Trax?
Chevrolet Trax (2013-2022 / MK 1) In this tutorial, see how to replace the cabin filter in the Chevrolet Trax, a very simple and cost-effective operation. First, position yourself in …
How to Replace the Air Filter on a Chevy Trax
How to Replace the Air Filter on a Chevy Trax
Chevrolet Trax (2013-2022 / MK 1) If you want to DIY the air filter replacement on this vehicle, follow the instructions below and you can also check the video. Once the bonnet is ope…
Where is the OBD2 port of the Chevrolet Trax located?
Where is the OBD2 port of the Chevrolet Trax located?
Chevrolet Trax (2013-2022 / MK 1) Thanks to the steps described in the following guide aimed at all of you who own a first-generation Chevrolet Trax, you will be able to find the OBD2…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos