Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Chevrolet Trax?

Model: Chevrolet Trax MK 1 - Years 2013-2022
Part: Cabin air filter

In this tutorial, see how to replace the cabin filter in the Chevrolet Trax, a very simple and cost-effective operation. First, position yourself in the passenger seat, then open the glove compartment and disconnect the right end stop damper using pliers. Next, grasp the left side of the drawer, push it inwards, and detach it from the dashboard. At this point, you can open the long rectangular flap by unlocking the relevant clips, remove the old filter, and insert the replacement after cleaning the housing of any debris.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD2 port of the Chevrolet Trax located?
Where is the OBD2 port of the Chevrolet Trax located?
Chevrolet Trax (2013-2022 / MK 1) Thanks to the steps described in the following guide aimed at all of you who own a first-generation Chevrolet Trax, you will be able to find the OBD2…
Where is the fuse box located on the 2019 Chevrolet Trax?
Where is the fuse box located on the 2019 Chevrolet Trax?
Chevrolet Trax (2013-2022 / MK 1) If you do not know where the main fuse box is located on your 2019 Chevrolet Trax, do not worry because the instructions in this guide will help you …
How to Replace the Rear Wiper Blade on the Chevrolet Trax
How to Replace the Rear Wiper Blade on the Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) Today, we will go through the instructions to remove and replace the rear wiper blade on the Chevrolet Trax in simple steps. First, move to the rear …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos