Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 port of the Chevrolet Trax located?

Model: Chevrolet Trax MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Checks and maintenance

See other generations:
Video tutorial

Thanks to the steps described in the following guide aimed at all of you who own a first-generation Chevrolet Trax, you will be able to find the OBD2 port inside the car in just a few seconds. First, open the driver's side door, then look to the lower left side of the dashboard and locate the OBD2 port you were looking for. Once found, you can proceed with connecting a diagnostic tool useful for both identifying and analyzing any errors detected by the ECU of your Chevrolet Trax.


Posted on 13 June 2025 by ScegliAuto


Related tutorials

Where is the fuse box located on the 2019 Chevrolet Trax?
Where is the fuse box located on the 2019 Chevrolet Trax?
Chevrolet Trax (2013-2022 / MK 1) If you do not know where the main fuse box is located on your 2019 Chevrolet Trax, do not worry because the instructions in this guide will help you …
How to Remove the Door Panel on a Chevrolet Trax
How to Remove the Door Panel on a Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) To remove the door panel on the Chevrolet Trax, you need to loosen the screws that secure it to the door. These screws are located in the handle rece…
What is the fuse diagram for the Chevrolet Trax?
What is the fuse diagram for the Chevrolet Trax?
Chevrolet Trax (2013-2022 / MK 1) If some devices in your Chevrolet Trax have suddenly stopped working, first check the status of the respective fuses, the diagrams for which are indi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos