Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Trax
    4. : How do you remove the door panel from the Chevrolet Trax?

Chevrolet Trax - Video tutorial

Model: Chevrolet Trax MK 1 - Years 2013-2022
Part: Door panel
Operation: How do you remove the door panel from the Chevrolet Trax?

In order to remove the Chevrolet Trax door panel you have to loosen the screws that secure it to the door: these screws are located in the seat of the internal handle and near the window control panel. When these screws have been loosened, it will be possible to go and detach the panel from the door, releasing the fixing clips that are placed inside. Once the panel has been removed, it will be possible to replace it by inserting a new one: the latter will have to be fixed by re-tightening the previously removed screws.


Posted on 12 May 2024 by ScegliAuto



Where is the fuse box located in the 2019 Chevrolet Trax?
Chevrolet Trax (2013-2022 / MK 1) If you don't know where the main fuse box of your 2019 Chevrolet Trax is located, don't worry because thanks to the directions described in the follo
How to replace the cabin filter in the Chevrolet Trax?
Chevrolet Trax (2013-2022 / MK 1) In this tutorial we can see how to replace the cabin filter in the Chevrolet Trax, a very simple and economical operation. First of all let's positio
How to reset the oil light on the 2015 Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) If you own a 2015 Chevrolet Trax and want to manually and autonomously reset the engine oil light, all you have to do is follow the various steps des

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos