Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of the exterior rearview mirror of the Chevrolet Trax.

Model: Chevrolet Trax MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Side mirror

See other generations:
Video tutorial

The steps today will allow us to dismantle and replace the exterior rearview mirror of the Chevrolet Trax. First, let's open the front door of the vehicle and start removing the door panel by unscrewing all the fastening screws and disconnecting the electrical connector of the window lift switch; then we will unscrew the screws of the rearview mirror, pulling it out from the outside (disconnecting the wiring first), as shown in the video.

At this point, we will install the new exterior mirror, and finally reassemble the door trim.


Posted on 5 January 2026 by ScegliAuto


Related tutorials

How to Replace the External Wing Mirror on a Chevrolet Captiva
How to Replace the External Wing Mirror on a Chevrolet Captiva
Chevrolet Trax (2013-2022 / MK 1) Learn the information and procedure for removing and replacing the external wing mirror on a Chevrolet Trax. First, open the front door of the vehicl…
How to Replace the Key Battery for the Chevrolet Trax
How to Replace the Key Battery for the Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) The most expensive solution is not always the right one. In fact, this could be the case for your smart key for the Chevrolet Trax. Often, an unexpec…
How to Remove the Rear Wiper on the Chevrolet Trax
How to Remove the Rear Wiper on the Chevrolet Trax
Chevrolet Trax (2013-2022 / MK 1) Discover in this video how to remove and replace the rear wiper blade on the Chevrolet Trax in simple steps. First, remove the plastic cover of the r…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos